Identification and verification of a previously undetected source of radio interference affecting communication between diagnostic tester and VCI.
Recurring connection interruptions between the diagnostic tester and the VCI affected daily workshop operations. Multiple remote support sessions and log file analyses did not reveal a clear root cause.
Determine whether the communication failures were caused by the WLAN infrastructure, environmental radio interference or another external factor.
Spectrum analysis revealed radio activity outside the expected WLAN signal profile. The measurements indicated the presence of a previously undetected source of interference affecting communication stability.

Directional antenna measurements were used to narrow down the physical location of the interference source. The affected frequency range could be tracked and localized with high confidence.

Following localization of the interference source, the alarm system was temporarily disabled for verification purposes, leaving the associated motion detectors without power.
During the verification period, no additional WLAN connection interruptions were observed. The measurements and practical validation confirmed the identified radio interference source as the root cause of the communication problems.